The CLOTS from "them" SHOTS are FLUBBER!

Indeedy, the PVA POLYMER BORATE-triggered HYDROGELS in the HUMAN CLOTS are NEARLY identical to the "silly" kids' CRAFT goop (an' I ain't jokin' either!)

Friends, when this "notion" struck my noggin' after listening to a few of the brave investigative docs (see below) talkin' bout the CLOTS I thought—COULD IT BE?!—I mean if ya look at those nasty stringy things that are bein' pulled outta the living AND the dead—wull, they DO LOOK like flubber. As a craft-happy mama, we made ALL MANNER of FLUBBER in our home (kids n' me together) so FLUBBER—which also goes by the names of GAK and SLIME (one variant) and is even (mis-named) as homemade SILLY PUTTY are intimately familiar ta me.

So, tin-pot-hat on my head, I wuz RIGHT!
(An' if this don't bust yer britches—wull, I don't know what WILL!). 

Guys n' Gals the shots MAKE FLUBBER in yer body, no if’s, and’s, er but’s about it.  The polyvinyl element in the jabs plus the borate combine into virtually the same dang GOO.  (If ya like them black-goo stories, mosey on down ta the bottom of this post—addin’ METALS to FLUBBER makes BLACK GOO too!) It's NEARLY the same mechanism, so take a gander at my links, you'll see there are STUDIES ta prove it!

WILD RIDE comin'….but first…
LOOK AT THE CLOTS and then LOOK AT THE FLUBBER:

See what I mean? Close enuf ta give ya the willies!  (Mebbe not identi-cull but close…)

So let's dig in a bit deeper…put on yer rubber boots!

From wicked-pedia: Flubber (named from the film The Absent-Minded Professor—see above), Glorp, Glurch, or Slime is a rubbery polymer formed by cross-linking of polyvinyl alcohol (PVA) with a borate compound. Slime can be made by combining similar polyvinyl-acetate-based adhesives with borax. ^[1]

Above…the Absent Minded Professor at work!

Reaction:

The gelation process entails formation of a borate ester that crosslinks the chains of the PVA.^[2] Borate esters form readily by condensation of hydroxyl groups and the B-OH groups.^[3]

The individual polymer chains are bound together by weak hydrogen bonds. The resulting polymer network is composed of strands of polyvinyl alcohol held together side-by-side by the borate molecules. It is evident that this cross linking is weak because of the ease with which the slime flows and pulls apart. However, even though this cross linking is weak, it does alter the properties of the resulting polymer.^[4]

Structure for borate ester that causes crosslinking in "slime".

Properties

Flubber is a non-Newtonian fluid that flows under low stress, but breaks under higher stresses and pressures. (adding here that the pressure exerted by blood flow would not likely be enough to break this stretchy stuff-ed) This combination of fluid-like and solid-like properties makes it a Maxwell fluid. Its behavior can also be described as being viscoplastic or gelatinous.

One COMMONALITY between FLUBBER ("slime") and CLOTS is that they take the shape of their CONTAINER be it a bowl or….an artery…

Known uses for these flubber-like hydrogels in the human body include robotics, health applications (ha!) and monitoring, data.

SO now that ya know WHAT the stuff is… let's take a look at it in motion

MAKING FLUBBER

EVEN a kid can make FLUBBER—notice:

• just how FAST the "reaction" occurs (“stringies” form almost instantly…)

• the various textures "achieved"… (apparently tweaking the formula renders various "fun" results; too much borax and elasticity is lost, so finding the SWEET SPOT is a thing. Guess we'll have to ask Pfffizer 'bout that…)

(It gits juicy at the 1 min 28 mark if yer in a hurry…)

If you want a SCIENTIST in GOGGLES to explain more, watch this feller (who calls it Slime but it IS Flubber!):

Courtesy of the American Chemical Society…

CLOTS TA MAKE YA PLOTZ (literally!)
discovered by some very BRAVE Medical Truth Tellers:

Daisy here is grateful for the work of: Dr. Ana Mihalcea, Dr. David Nixon, Dr. Jane Ruby, Morgellons’ researcher Clifford Carnicom and embalmers Richard Hirshman and David O'Looney with a special chuzza to Mike Adams / The Health Ranger for studying these clots using his own labs (when all other labs refused to help! chickens!) AND to internet host Stew Peters for getting' out a flawed but widely-seen exposé on the connection between them clots and the many folks who "simply"…DIED SUDDENLY (one more demerit fer excluding Dr. Jane from the production—WHY?). 

Anywho, I don't want to git too much into the weeds / complexities of these chemmy-cul reactions, but in brief, the clots are synthetic polymer hydrogels and it was shown under microscopic examination that these clots DID NOT contain blood, blood vessels or human tissue or any of the "expected" elements that support human life. They DID contain high levels of electrically conductive metals (comparable to glitter in the Flubber!) including tin and high amounts of other conductive elements such as sodium (salt draws current, think back ta middle school y'all…). SO…this is how you run a circuit board (in a flexible gel) AND—shudder—they kin do this INSIDE the human BODY. Oy.

If ya wanna "skeer" to know more about it, take a look-see at the viddeyo below with brave Dr. Ana and brave journalist Maria Zee (jump ta the 33 minute mark to get to the juicy stuff 'bout the CLOTS):

VIDEYO HERE (in case the link above isn't workin')

Like I said, at the 33 minute mark (oh them signifyin’ 33's 'r croppin' up…) she talks about the hydrogel CLOTS – and how HYDROGELS ALONE are used to create CLOTS. Plus they are SO STRONG an' STRETCHY stretchy they can withstand HUGE amounts of systolic pressure—about 3 times the max. pressure in a body. So what she says is that this hydrogel is virtually "unbreakable" AND that it's a "hemostatic" meaning it CAUSES clots.

Yup, the polymer (hydro)gel in the jabs creates the RUBBERY clots upon meeting the human bloodstream at PH7 (normal Human PH)!  Borate (my friends) is known as a BUFFER—you find it in starch an' contact lens solutions—so it alters the PH enough ta boost (sorry!) clotting.  Oh, by the by, when it comes ta clottin', fergit the mRNA and the other "biosludge" co-fact-turds in the jabs—they effect MANY other harms of course, but the clottin' phenomenon is a thing IN and OF itself!   And despite some “Cole Minors” claimin' otherwise, folks these clots are not "ameloid" ("natural" like the ones some patients used ta git…)  The one factor that DOES affect the clots are the metals.  Them metals (given their different electrostatic charges) "tweak" the hydrogel clots and the biosensor characteristics…  (Shudder.) No doubt the Mad Scientists at DOD/DARPA are watchin' these FX (effects!) with glee.  And again, adding different metals is makin' SPARKLE FLUBBER (aka Sparkle Slime, see below) –but all that glitters, as we know, ain't gold! (Indeed, per Dr. David Nixon GOLD de-activates some'a the electronics IN the jabs—but that's another topic fer another time!)

Another GREAT Viddeyo from Dr. Ana:
addressing the PVA-specific polymers:

"Synthetic Biological Life Forms – CDB, Morgellons, Live Blood Findings in Post C19 Injection Era"

DESCRIPTION: Ana Maria Mihalcea, MD, PhD interviews Clifford Carnicom. We discuss Clifford’s research of Morgellons and CDB, his analysis of this synthetic life forms, his finding of polyvinyl alcohol, an ingredient of Hydrogel. We explore correlations between current live blood findings in the era of C19 injections.

PUBLIC-'kay-SHUNS

(experiments all o'kay'd n' published in Medi-Cull Journals..)

First, let's look at some headlines of STUDIES that Dr. Ana has found about these polymer hydrogels:

Seein' it NOW?

Let's ALSO share some RECENT studies Daisy here found just pokin' round the innertubes (see bolded text in the comments, things I found "tellin' "). Adding that MANY are being done in CCP (an' ya'll know Fauxchee an' DOD /DARPA/BARDA n' friends fund… an' have their Chow Fun over thar on US!).  Just sayin'…

1. Thermally Stable Solid Polymer Electrolyte Containing Borate Ester Groups For Lithium Secondary Battery

2. A Self-Healing Electrically Conductive Organogel Composite from 3/9/23

Here we report an organogel composite that is based on poly(vinyl alcohol)–sodium borate and has high electrical conductivity (7 × 10⁴ S m⁻¹), low stiffness (Young’s modulus of ~20 kPa), high stretchability (strain limit of >400%) and spontaneous mechanical and electrical self-healing.

3. Electrically Programmable Adhesive Hydrogels for Climbing Robots

from Science Robotics, 28 Apr 2021, Vol 6, Issue 53

Here, we report a borate ester polymer hydrogel that can rapidly switch between adhesive and nonadhesive states in response to a mild electrical stimulus (voltages between 3.0 and 4.5 V). This behavior is achieved by controlling the exposure and shielding of the catechol group through water electrolysis–induced reversible cleavage and reformation of the borate ester moiety. By switching the electric field direction, the hydrogel can repeatedly attach to and detach from various surfaces with a response time as low as 1 s. This programmable attaching/detaching strategy provides an alternative approach for robot climbing. The hydrogel is simply pasted onto the moving parts of climbing robots without complicated engineering and morphological designs.

4.  Transient Polymer Hydrogels Based on Dynamic Covalent Borate Ester Bonds

Chunxiao Zhang, Haoyue Lu, Xu Wang  First published: 10 September 2022

Herein, we design a transient polymer hydrogel based on fuel-mediated covalent borate ester bonds. The pH-sensitive covalent borate ester bond is formed by the reaction between polyvinyl alcohol (PVA) and boric acid (B(OH)₃). Sodium hydroxide (NaOH) and 1,3-propanesulfonate (PrS) are used together as the chemical fuels to temporally control the pH of the system. Meanwhile, the lifetime of the transient hydrogel can be simply controlled by adjusting the composition of the chemical fuel, and the cyclic phase transitions can also be achieved. These programmable transient hydrogels have potential applications in the fields of information transmission and fluid guidance.

5. Recent Progress in Self-Healing Polymers and Hydrogels Based on Reversible Dynamic B–O Bonds: Boronic/Boronate Esters, Borax, and Benzoxaborole   
First published on 18th May 2021

Intrinsic self-healing polymeric materials are substances that relieve external stress and restore their original mechanical properties after extreme damage via dynamic covalent bonding in the polymeric structure or the reversible association of supramolecular motifs. Boronic ester-based dynamic covalent bonds formed between boronic acids and diols impart excellent self-healing properties to the hydrogels, organic gels, elastomers, and plastics depending on the characteristics of the corresponding polymer. In addition, these bonds induce internal reorganization in the chemical/physical structure in response to changes in the biological signals and biomaterials, such as hydrophilicity, pH, and the presence of glucose. (An' we all know glucose is in our bloodstreams folks!-ed) This multi-responsiveness to stimuli as well as the self-healing, injectability, and biocompatibility of boronic ester-based polymers have led to several technological achievements with applicability in biomedical fields, including drug delivery, medical adhesion, bioimplants, and healthcare monitoring. This review provides an overview of various self-healing polymeric materials based on reversible B–O bonds, with a focus on boronic/boronate esters, borax, and benzoxaborole and their properties, responses to external stimuli, and applications.

REAPEATIN' THIS SALIENT PART:

biomedical fields, including drug delivery, medical adhesion, bioimplants, and healthcare monitoring

6. Strain Hardening Behavior of Poly(vinyl alcohol)/Borate Hydrogels

Here Daisy summarizes:
This one is about using oscillation changes (amplitude) / frequency shifts to ALTER the behavior of the hydrogels.  Yoo-hoo 5g, 6g, EMF's …SIGNALS y'all.  As best as I kin see it—GAUSS / EMFs affect elasticity (or hardening) of the gels. 

“Gee Marvin, Mr Wilson is not being COOPERATIVE any more, do me a favor an' send him a good signal today—"harden" up them hydrogels. Time to take him OUT (and we don't mean to the ball game ha ha..)”

BANG UP BONUS POINTS…

I mentioned GLITTER FLUBBER (aka Sparkle Slime / Unicorn Gak) earlier in this postin' and I thought I'd give y'all a REAL skeer watching what it DOES when MAGNETIZED think’ve that GRAPHENE).  Cuz WE KNOW that there are all manner’a metals in the INJECTIONS and in the CLOTS (not ta mention rainin' down upon us from them tasty ChemTrails…Happy Trails to Yoooooo!). Gosh, an you thought Wheaties was “fortified” with iron…ya didn’t know the half’ve it!

Lookey:

MAGNETIC FLUBBER no. 1

MAGNETIC FLUBBER no. 2

While folks worry 'bout the likes of Sam "Dress Up Doll / Sister Ray Dee O'Active" Brinton havin' had his hands on nuclear waste buttons (n' bows!), I myself ALSO worry about whose got their hands on the EMF / 5G buttons an' what they're doin' with them controls and signals TO the injected folks…and mebbe to the rest've us too! (Per Dr. Ana we all got some'a this tech INSIDE us TOO, even if we avoided all the "interventions…")

SO….TELL ME FOLKS, WHY (oh why) can one quick search serve up PVA's creepy "dual purpose" not unlike the jabs themselves???

Pretend ya didn' see it…for yer own sanity! THINKING bout this stuff is enuf to drive a sane man (or woman) cwazy… (the MSM would like you n’ me to STOP thinkin’!)

I KNOW, IT WAS THE EGGS…

Who hatched this one?

Now for all my fine feathered readers who THOUGHT these FLUBBER clots were caused by them CLOT SHOT JABS…No siree!  We "know" that idea laid an EGG!  Fergit all ya just read above and…

Don't eat the yummy eggs folks cuz EGGS are the true cause of the clots (and we know THIS because we saw it on the InterNet—TRUST THE “SLIME-ANTS” !!!!!

Scientists Warn Eggs Are Causing Thousands of People to ‘Suddenly’ Form Blood Clots

There's a sayin' 'bout them chickens comin' home ta roost--wull may it be so!
(sooner ruther than later too!)
Daisy
(who tries to take life sunny-side up!!!)

Now ya kin buy me a cuppa java if ya like, alwayz grateful fer y’all!
https://ko-fi.com/daisymoses

(This one’s a goodie on the crackpot scale if I don’t say so myself!)